How to replace the metal filter mesh of a vacuum cleaner

▲Prepare tools: Before starting, prepare the necessary tools such as a screwdriver (if disassembly is required), cleaning cloth, and new metal mesh.
▲Disconnect power: Ensure that the vacuum cleaner has been disconnected from the power source, unplug the power plug to ensure safety.
▲Open the vacuum cleaner housing: Find and open the housing according to the model of the vacuum cleaner. Usually, it is necessary to use a screwdriver to remove the fixed screws or press the buckle.
▲Find the location of the filter: Find the position of the metal filter inside the vacuum cleaner. It is usually located near a dust bag or bin.
▲Disassemble the old filter: Carefully remove the old metal filter mesh. According to the design, it may be necessary to gently twist or pull out.
▲Clean filter seat: Before installing a new filter, use a cleaning cloth to clean the filter seat, remove dust and impurities, to ensure good sealing of the new filter.
▲Install new filter: Place the new metal filter mesh into the filter seat, ensuring it is aligned correctly and securely fixed.
▲Reinstall the vacuum cleaner: Reinstall the vacuum cleaner housing, ensuring that all screws or buckles are securely fastened.
▲Test vacuum cleaner: Plug in the power, turn on the vacuum cleaner, check if it works properly, and ensure that there are no abnormal noises or air leaks.
▲Regular inspection and cleaning: Regularly inspect and clean the metal filter to maintain optimal performance of the vacuum cleaner.