Modern sheet metal processing manufacturing industry

Dec 11, 2025

Sheet metal processing: modern sheet metal processing manufacturing industry

Sheet metal processing, as the name suggests, is a comprehensive cold working process for metal sheets (usually below 6 millimeters). It shapes flat metal sheets into various complex three-dimensional structural components through a series of processes such as cutting, bending, stamping, and welding. From the internal brackets of smartphones to the curtain walls of skyscrapers, from the casings of household appliances to the precision components of aerospace vehicles, sheet metal parts are ubiquitous and are one of the most widely used and fundamental manufacturing technologies in modern industry.

 

1, Core Process Flow: The Journey from Drawing to Finished Product

The typical sheet metal processing flow is a chain of interlocking technologies:

Design and Engineering (Key Starting Point):

Drawing conversion: Unfold the 3D model into a 2D flat expansion, accurately calculate material utilization and bending compensation.

DFM (Design for Manufacturability) analysis: Excellent engineers will consider machining constraints such as minimum bending radius, hole edge distance, tool interference, etc., and optimize the design to reduce costs and improve yield.

Cutting (giving contour):

Laser cutting: The current mainstream technology uses high-energy laser beams for non-contact cutting, with high precision and good flexibility, suitable for complex graphics and small to medium batches.

CNC punching machine: using molds for punching and cutting, suitable for parts with a large number of standard holes and louvers, with high production efficiency for large quantities.

Plasma cutting: suitable for thicker carbon steel plates, with fast speed, but relatively poor heat affected zone and accuracy compared to laser cutting.

Water jet cutting: using ultra-high pressure water flow (mixed abrasive) for cutting, without thermal deformation, can cut any material, but at a slower speed.

Forming (giving shape):

Bending: the core process. By using a CNC bending machine with different upper and lower molds, the sheet metal can be bent into the desired angle through precise control of stroke and pressure. The accuracy can reach ± 0.1 degrees.

Stamping/stretching: Using the pressure of molds and punching machines to cause plastic deformation of the sheet metal, forming concave convex, relief, reinforcing ribs or deeper shells (such as stainless steel sinks).

Connection and assembly (endowing functionality):

Welding: The most commonly used permanent connection methods include argon arc welding (TIG/MIG, used for stainless steel and aluminum), resistance spot welding (used for thin plate overlap), and laser welding (high-precision, low deformation).

Fastener connection: Removable assembly is achieved through riveting, pulling riveting, or threaded connections (such as riveting nuts and screws).

Adhesive: Using specialized metal adhesive, suitable for different materials or situations where deformation is avoided.

Surface treatment (giving appearance and protection):

Pre treatment: degreasing, rust removal, phosphating, passivation, providing a good substrate for subsequent coatings.

Coating: Powder coating (environmentally friendly, wear-resistant, diverse colors), electrophoresis (uniform coverage, good corrosion resistance), electroplating (galvanized, chrome plated, nickel plated, providing anti-corrosion or decorative effects).

Conversion film: Anodizing (mainly used for aluminum materials to improve hardness, corrosion resistance, and coloring ability).
 

2, Material selection: balance between performance and cost

Choosing the right materials is half the battle for successful design:

Cold rolled steel plate (SPCC): the most commonly used, low-cost, strong, easy to process, and can be treated with various surface treatments.

Galvanized sheet (SECC/SGCC): comes with a rust proof layer and is commonly used in chassis and cabinets, but the welding parts require special treatment.

Stainless steel (SUS304/316): corrosion-resistant, aesthetically pleasing, but with obvious work hardening, requiring high requirements for cutting tools and processes.

Aluminum and aluminum alloys (such as 5052-H32, 6061-T6): lightweight, good electrical and thermal conductivity, corrosion resistance, easy to bend but relatively soft, high cost.

Copper/brass: mainly used for conducting electricity, heat, or decorative parts.

3, Industry development trends and challenges

Intelligence and automation:

Black Lamp Factory ": Automated production lines, robot loading and unloading and welding, AGV logistics, achieving 24-hour uninterrupted production.

Software integration: From CAD/CAM to MES/ERP systems, achieve full process digital management, improve scheduling efficiency and traceability capabilities.

Technology integration and innovation:

Composite processing: Laser cutting and stamping composite machines, combined with bending centers and robots, reduce process conversion and improve accuracy and efficiency.

Combination of additive manufacturing (3D printing): For extremely complex or small batch components, 3D printing is used to manufacture molds or directly form them, and then combined with sheet metal parts.

Green manufacturing:

Using environmentally friendly coatings (water-based paint, high solid powder), optimizing sampling software to reduce material waste, and recycling waste materials and cutting fluids.

Industry challenges:

Cost pressure: fluctuations in raw material prices and rising labor costs.

Talent shortage: Experienced benders, welders, and process engineers are scarce.

Fragmentation of orders: Small batch, multi variety, and fast delivery orders have become the norm, placing higher demands on production flexibility.
Company Introduction