How to disassemble a metal filter screen

The method of dismantling a metal filter mainly involves using appropriate tools and following the correct steps. Here are some specific guidelines:
Preparation tools: Firstly, necessary disassembly tools need to be prepared, usually including adjustable wrenches and pliers. If encountering metal parts with smooth surfaces, you can first wrap them with raw tape to increase friction and prevent slipping. ‌
Positioning metal head: Find the circular metal head on the faucet or other device, which can be directly unscrewed. Usually, this metal head is located at position 12 of the water outlet. ‌
Unscrew counterclockwise: Use a wrench to rotate counterclockwise and unscrew it. This step requires moderate force, but excessive force should also be avoided from causing component damage. ‌
Dismantling the filter: Once the metal head is unscrewed, the filter inside can be removed for cleaning or replacement. If it is a filter screen on the faucet, after completing this step, the disassembly and cleaning process of the filter screen is completed. ‌
Specific device guidance: For specific devices, such as Greet Shuang cabinet machines, the steps for disassembling the filter may be slightly different. This may involve pressing a specific combination of buttons to activate the cleaning mode, then removing the screws with a screwdriver and pressing the upper and lower parts of the frame with both hands, pulling the filter down forcefully to remove 3. ‌
By following the above steps, it is possible to effectively disassemble and clean the metal filter screen, ensuring the normal operation of the equipment and the cleanliness of the water quality. ‌